Опубликовано: 25 апр. 2016 г.Video showing thousands of images captured and converted to video with a SoilCam! Instructions to build one at: http://www.instructables.com/id/Build...
Опубликовано: 1 мая 2020 г.In this video, we will be making a simple leather tote bag featuring a front pocket and an inside pocket. The tote bag is made from Redrock leather in the Smokey Gray color and it is entirely hand-stitched using Ritza Tiger Thread. The main body of the bag is 18” wide x 32” long, so it has plenty of room! If you want a smaller bag, you can use this same concept but change the dimensions to make a bag that fits your needs.
Опубликовано: 27 мар. 2020 г.Making a simple leather tool bag for my bicycle that mounts under the saddle. Easy and relaxing project I was able to make in my apartment with limited tools in this lockdown period. Leatherworking is always fun and enojoyable to me! I decided to limit punched holes to minimum so I don't bother neighbours and got a decent result with drilling with 1.5mm bit and enlarging with thick needle/awl on the hand held drill. I used thick and un-finished leather for the side caps because it holds the shape way better than the thinner one I used for the rest of the bag.
If you are doing something like this you need to figure out a mount solution as most likely the way I did this is not applicable to all saddle.
For those asking where to find tools:
I bought mine some years ago when I was starting to make leather sheaths. I went for the cheapest I was able to find. Have been working great so far! Can't find exactly the one I have but I listed some in my amazon storefront that are pretty much the same and any similar ones will work aswell. https://www.amazon.com/shop/blackbear...
It's affiliate marketing so if you order something from here you'll help the channel for free! Thank you!
Index of operation and materials: 0:20 For measurements I used width of the saddle and diameter of the bottles I had 0:35 Round corners for the opening 1:00 Mark and cut circle for sides, leaving extra material on the edges 1:40 Wet leather can be formed easily, when dried it will retain the shape 2:30 Beveler tool used to chamfer leather edges 3:20 Two latches are used to secure the bag under the saddle 3:50 Fork punch used to mark position of stitch holes, then drilled and sized with awl 5:20 Cut slots to pass the latches through the bag 5:50 Contact adhesive to secure sides and main piece togheter 6:55 Trim excess leather with Maker Knife 7:30 Bevel inside circle and round all the edge to make it look nicer 8:00 Dark Brown leather dye used to stain un-finished leather and all edges 9:00 Groover used to mark position of stitches 9:20 Fork punch leaves mark to space stitch holes 9:55 Drilled holes are then enlarged and burnished with awl in hand held drill 10:00 Rough side of the hole is sanded down and re-finished with dark brown dye 10:30 Waxed thread, going over the edge externally just for the look of it 12:00 Badge is textured with alchool to remove original finish, then sanded to add texture and re-finished with brown dye 12:35 Branding iron is used to hot stamp my logo 12:50 Matt leather finish applied to seal everything 13:00 Badge is glued with contact adhesive over the latch stiches to reinforce the area 13:30 Two leather strip are cut to lengh and width to be used as bag lock 14:10 Simple buttons hold plenty enough for something like this, I would have liked to try a more unique lock but nothing cool and doable came to mind.
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
Опубликовано: 3 мар. 2016 г.Marcs & Costa specialises in selling wholesale Italian leather bags that are hand crafted by the best craftsmen with leather of the highest quality in Florence. We produce for many designer labels found in many large warehouses and also produce under our own brands. Please visit our B2B webshop http://jenny-co.com for more information.
Опубликовано: 24 авг. 2018 г.I used some different techniques making this bag/purse. The front piece of the purse is slightly bulking out, due to the lapped seam. This creates a more round look. Also I pre-punched all the holes on all pieces, which is incredibly useful on some items.
Materials used:
-Pull up shoulder 2.5mm
-Contact adhesive
-0.6mm tiger thread
-Beeswax for burnishing
Как в 68 чувствовать себя на 35 | Как одеваться после 60 лет | Таша Строгая — Хорошо за 50
Опубликовано: 18 мар. 2020 г.Галине Ивановне 68 лет, до пенсии она работала менеджером по туризму. Много лет назад потеряла мужа, 5 лет назад похоронила дочь, остался внук. Некоторое время жила в гражданском браке. Сегодня Галина Ивановна регулярно посещает мероприятия в клубах «Московское долголетие», увлекается скандинавской ходьбой, театром, изучает французский язык, ходит на лекции по музыке и архитектуре, обожает путешествовать. Галина хочет выглядеть модно и стильно, быть всегда в тренде, устроиться на работу, а также не теряет надежду наладить личную жизнь и познакомиться с интересным мужчиной. К тому же есть отличный повод для преображения: юбилей подруги, на котором будет много старых коллег.
Опубликовано: 13 мар. 2019 г.Привет! Меня зовут Оксана. Это канал о моей жизни. Влог, семья, путешествия, видео о Москве, и еще много всего интересного-все это вы можете увидеть на моем канале! Присоединяйтесь! Буду рада новым знакомствам!
Ждем вас в гости!
Instagram oksanochka_moscow
Одноклассники https://ok.ru/profile/386081700274
ПУТЕШЕСТВИЕ В ГРУЗИЮ: https://www.youtube.comhttps://www.youtube.com/watch?v=fLBgr...